Cable Electronics DVP14 Specifikace Strana 14
- Strana / 332
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
1. Before Connecting to PLC 1-3
n : 1 Connection (Multi-link 2)
Outline
• One PLC is connected to a maximum of four V7 series.
• An original network is created where the V7 series (Local Port 1) that is directly connected to the
PLC is the master station, and other three V7 series are slave stations. Only the master station
makes communications directly with the PLC, and the slave stations make communications with
the PLC via the master station.
• Communications between the V7 master station and the PLC depend on the communication
speed set on the PLC. The maximum available speed for the V7 series is 115 kbps, which is
higher than the one available with multi-link connection described in “n : 1 Connection (Multi-link)”
(page 1-4).
• This multi-link connection is available with almost all the PLC models that support 1 : 1 connection
(refer to the “Appendix”).
The connection between the master station and the PLC is the same as the one for 1 : 1
connection.
• Use the RS-485 2-wire connection between stations of the V7 series. Please use Hakko
Electronics’ multi-link 2 master cable (V6-MLT) for connection between the master station (Local
Port 1) and the slave station (Local Port 2).
• In the following cases, multi-link 2 connection is not available.
1. A communication interface unit (example: OPCN-1, CC-LINK, Ethernet, etc.) is used.
2. The V6 series (master or slave station) is used for the temperature control network or
PLC2Way function.
• The V7 and V6 series can be used together. The V6 series can be the master station.
(However, when V606/V606i is the master station, the slave station must be V606/V606i. Also,
depending on the hardware version of the V6 series, multi-link 2 connection may not be supported.
Refer to the V6 Hardware Specifications.)
Notes on Connection
For more information, refer to “Appendix 2, n : 1 Connection (Multi-link 2).”
PLC
RS-232C
RS-422
RS-485
CN1 MJ2 CN1 CN1 CN1
Hakko Electronics’ cable
“V6-MLT” (3 m)
RS-485 connection
V7 master station V7 slave station V7 slave station
Local port 1 Local port 2 Local port 3 Local port 4
V7 slave station
- V Series 1
- Record of Revisions 2
- Contents 7
- Appendix 7 V-Link 11
- Connection Compatibility List 11
- 1. Before Connecting to PLC 12
- 1 : n Connection (Multi-drop) 13
- Notes on Connection 14
- CN1 CN1 CN1 CN1 15
- Interface 16
- Slide Switch 17
- D-sub 25-pin (male) 18
- D-sub 9-pin (male) 18
- RJ-45 8-pin 18
- Wiring (1 : 1 Connection) 19
- MONITOUCH 21
- Send delay 21
- 1st byte 2nd byte 22
- Screen No. 5 24
- Screen No. 2 24
- Screen No. 0 24
- 2. Allen-Bradley PLC 26
- PLC-5 Series: Switch Setting 28
- 1770-KF2 29
- CPU Port Channel 0 30
- 3. Automationdirect PLC 36
- 4. Baldor PLC 42
- 5. DELTA PLC 44
- 6. FANUC PLC 46
- 7. FATEK AUTOMATION PLC 50
- 8. Fuji Electric PLC 54
- 8-2 8. Fuji Electric PLC 55
- Character switches 55
- 8-4 8. Fuji Electric PLC 57
- 9. GE Fanuc PLC 60
- 10. Hitachi PLC 64
- HIDIC-H: Switch Setting 65
- HIDIC-S10/2α 66
- HIDIC-S10/ABS 66
- 11. IDEC PLC 70
- 12. KEYENCE PLC 72
- KV-700 CPU 74
- KZ24/300 CPU 74
- KV10/24 CPU 74
- 13. KOYO ELECTRONICS PLC 80
- Switch Setting 82
- 14. LG PLC 88
- MASTER-KxxxS 90
- MASTER-KxxxS CNET 90
- GLOFA CNET / GM Series CPU 90
- Available PLCs 96
- 16. MITSUBISHI ELECTRIC PLC 100
- FX Series 101
- Communication Setting 102
- A Series CPU, QnA Series CPU 103
- FX Series Link (A Protocol) 103
- AJ71UC24 104
- A1SJ71C24-R2, A1SJ71UC24-R2 104
- Available Memory 105
- FX Series, FX1S Series 106
- FX2N Series 106
- Wiring Diagram 1 107
- Wiring Diagram 2 108
- Wiring Diagram 3 108
- Wiring Diagram 4 109
- Wiring Diagram 5 109
- Wiring Diagram 6 110
- Wiring Diagram 7 110
- Wiring Diagram 8 111
- A Link + Net10 112
- V-MDD (Dual Port Interface) 114
- Ladder Transfer Function 114
- Connection 115
- CPU port 115
- Settings and Communications 116
- Editor: ... Editor: MJ1 117
- Please use this page freely 119
- 17. MODICON PLC 120
- 18. MOELLER PLC 122
- 19. OMRON PLC 124
- SYSMAC CS1/CJ1 DNA 131
- 20. SAIA PLC 132
- 21. SAMSUNG PLC 136
- 22. SHARP PLC 138
- 23. SHINKO ELECTRIC PLC 142
- 24. Siemens PLC 144
- S5 PG Port 145
- S7-200PPI 145
- S7-300/400MPI 145
- TI500/505, TI500/505 V4 146
- TI500/505 (TI500/505 V4) 149
- Wiring Diagram 9 154
- 25. TAIAN PLC 156
- 26. Telemecanique PLC 158
- 27. TOSHIBA PLC 160
- 28. TOSHIBA MACHINE PLC 164
- 29. Toyoda Machine Works PLC 166
- Screen Editing (Memory Input) 167
- 30. VIGOR PLC 170
- 31. Yamatake PLC 172
- 32. Yaskawa Electric PLC 174
- 33. Yokogawa Electric PLC 180
- Appendix 1 PLC2Way 186
- V7 series 187
- (RS-232C, RS-485/RS-422) 189
- For V7 Series: 190
- V-SFT Setting: System Setting 191
- Code and Text Processing 194
- 2nd byte 1st byte 194
- V-SFT Setting 195
- Trend sampling Data sampling 200
- Indirect Memory Designation 202
- Processing Cycle 203
- Notes on Screen Data Transfer 204
- System Memory 205
- (Fig. a) 207
- (Fig. b) 207
- Multi-link 2 208
- Te rm i na l 209
- For V706: 210
- Communication Error 214
- Multi-link 216
- 1 : n Connection 222
- Wiring (RS-422/485) 223
- Notes on Communication Errors 224
- Appendix 5 Ethernet 226
- Ethernet 227
- IP Address for the V7 Series 228
- ADR - LOW - HI 229
- Option Unit DU-01 230
- 10BASE-T Connection 231
- Repeater 232
- Transferring Screen Data 234
- Appendix 5 Ethernet App5-11 236
- 6. Data transfer is started 236
- Application 237
- Appendix 5 Ethernet App5-15 240
- Starting and Closing 242
- Menu and Icons 242
- Editing the Network Table 243
- 255. 255 245
- Macro Command 246
- Appendix 5 Ethernet App5-25 250
- App5-26 Appendix 5 Ethernet 251
- Addresses 252
- Sample Folder 253
- Function Specifications 255
- Read Words from PLC Memory 256
- Read Bits from PLC Memory 258
- Write Words to PLC Memory 260
- Write Bits to PLC Memory 262
- Others Functions 263
- Receive Wait from V7 264
- Cancel Receive Wait Function 264
- Close Processing 264
- Get Source’s IP Address 264
- Get Error Contents 265
- Appendix 5 Ethernet App5-43 268
- • System memory: $s518 268
- App5-44 Appendix 5 Ethernet 269
- System Composition 273
- Input/Output Connector 274
- 1 2 3 4 5 6 7 8 9 10 11 12 13 275
- 12345678 279
- <4-wire system> 282
- System Setting 283
- Setting Items 284
- V series (CN1) Host 289
- <2-wire system> 289
- Standard Type Protocol 290
- Contents Protocol 291
- When V series data is 291
- When the host writes 291
- H 30H 30H 31H 297
- H 46H 32H 41H 297
- Response Time and BUSY 298
- Global Port Number (FFH) 299
- WORDWORDWORDWORD 302
- WORDWORD 303
- • Retry command 304
- 0001020304050607 305
- SW0 SW1 ENT0 ENT1 ENT2 307
- WORD WORD 308
- Error Codes 310
- 1-byte Character Code List 312
- Memory Map 313
- System Memory ($s) 314
- Switch action flowchart 316
- RS-232C → 320
- Protocol 322
- App7-6 Appendix 7 V-Link 323
- Data Items for Protocols 324
- Sum Check Code (SUM): 2 bytes 325
- Response Code: 2 bytes 325
- NAK: Error Codes 326
- List-2 329
- February, 2004 330
- List-4 331
- Hakko Electronics Co., Ltd 332
Související produkty a manuály pro Procesory Cable Electronics DVP14
Procesory Cable Electronics DVP14 Specifikace
(2 stránky)
(2 stránky)
Procesory Cable Electronics DVP14 Uživatelský manuál
(40 stránky)
(40 stránky)
Procesory Cable Electronics DVP14 Specifikace
(150 stránky)
(150 stránky)
Samsung AQ09FAN manuali
Manuali dei proprietari e guide per l'utente per no Samsung AQ09FAN.
We fornisce 3 manuali pdf Samsung AQ09FAN per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Samsung AQ09FAN Manuale Utente (22 pagine)
Marchio: Samsung | Categoria: No info | Dimensione: 11.84 MB |
Samsung AQ09FAN Manuale Utente (26 pagine)
Marchio: Samsung | Categoria: No info | Dimensione: 10.72 MB |
Indice
Como Empezar
11
IMPORTANTE
24
Più prodotti e manuali per no Samsung
| Modelli | Tipo di Documento |
|---|---|
| AP-G12710 | Manuale Utente Samsung AP-G12710 사용자 설명서, 32 pagine |
| SC5450 |
Manuale Utente
Samsung SC5450 Instrukcja obsługi,
16 pagine
|
| SAMSUNG ES9 |
Manuale Utente
Samsung SAMSUNG ES9 Handleiding,
105 pagine
|
| BCD-199NKMB | Manuale Utente Samsung BCD-199NKMV 用户手册, 20 pagine |
| SAMSUNG ES99 |
Manuale Utente
Samsung ES99 用户手册 [da] ,
123 pagine
|
| DIGIMAX-L70B |
Manuale Utente
Samsung DIGIMAX L70 ユーザーマニュアル,
78 pagine
|
| SM-T535 |
Manuale Utente
Samsung SM-T535 Kasutusjuhend,
112 pagine
|
| MWR-VH12N |
Manuale Utente
Samsung MWR-VH12N Manual de usuario,
18 pagine
|
| SRS689QESI | Manuale Utente Samsung SRS689QSWSI 사용자 설명서, 32 pagine |
| AW09FBNEA |
Manuale Utente
Samsung AW09FBNEA instrukcja,
20 pagine
|
| SAMSUNG WB35F |
Manuale Utente
Samsung SAMSUNG WB35F ユーザーマニュアル,
136 pagine
|
| GT-E2152 |
Manuale Utente
Samsung GT-E2152 User manual,
76 pagine
|
| AQV18UGAN |
Manuale Utente
Samsung AQV18UGAN Manuel utilisateur [sk] ,
33 pagine
|
| YP-T10AG |
Manuale Utente
Samsung YP-T10QB User manual,
118 pagine
|
| BCD-410DNIS | Manuale Utente Samsung BCD-410DNIS 用户手册 [en] [nl] , 28 pagine |
| SAMSUNG ST65 |
Manuale Utente
Samsung SAMSUNG ST65 Manual de utilizare [ja] [zh] ,
107 pagine
|
| WD7122CKC |
Manuale Utente
Samsung WD7122CKC Kullanıcı Klavuzu,
28 pagine
|
| VP-MX20 |
Manuale Utente
Samsung VP-MX20 User manual,
121 pagine
|
| RL34HGIH |
Manuale Utente
Samsung RL34EGSW Používateľská príručka,
29 pagine
|
| SC4020 |
Manuale Utente
Samsung SC4020 Navodila za uporabo,
5 pagine
|
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce